Foundations Of Amateur Radio

Foundations of Amateur Radio Before we start I should give you fair warning. There are many moving parts in what I'm about to discuss and there's lots of numbers coming. Don't stress too much about the exact numbers. In essence, what I'm attempting is to explore how we can reduce the power output from a transmitter in such a way that it doesn't blow up a receiver whilst making sure that the signal is strong enough that we can actually measure it. With that in mind, recently I discussed the idea of adding a series of attenuators to a transmitter to reduce the power output by a known amount so you could connect it to a receiver and use that to measure output power at various frequencies. One hurdle to overcome is the need to handle enough power in order to stop magic smoke from escaping. None of my attenuators are capable of handling more than 1 or 2 Watts of power, so I cannot use any of them as the first in line. As it happens, a good friend of mine, Glynn VK6PAW, dropped off a device that allows you to di