Foundations Of Amateur Radio

Foundations of Amateur Radio Have you ever asked yourself a question that turned out to be a rabbit hole so deep you could spend a lifetime exploring and likely never come out the other end? I did. Yesterday. What's a Volt? This came about when I started exploring how to measure the power output of my WSPR or Weak Signal Propagation Reporter beacon. According to the specifications the output level is 23 dBm or 200 milliwatts. If you read the fine print, you'll discover that the power output actually varies a little depending on which band you're on, for my specific transmitter it says that the output on the 10m band is 22 dBm, or 158 mW. That comes with a disclaimer, that there can be some variation on individual transmitters of about 1 dB. So, on 10m, my output could vary between 21 and 23 dBm, or between 125 and 200 mW. With my attenuator connected, the output could be between 12 and 20 mW, and that's assuming that my attenuator is exactly 10 dB, it's not. Measuring anything means to compare it again